Enabling/Disabling The Operation Of The Elevating Section - Nikon DS-L4 Instructions Manual

Enabling/Disabling the Operation of the Elevating Section

6.2
You can enable or disable the focus knob to operate the elevating section of the main body. The ESCAPE button is not
affected by this setting.
Setting Item Target of the Configuration
[Ni-E] Ni-E focus knob
[ERGC/JOY] Focus knob of the ergo controller or
the joystick
[Procedure]
[MIC SETUP] → [UTILITY]
Enable or disable the function by pressing the [Ni-E] or
[ERGC/JOY] button under [FOCUS KNOB ENABLE].
ON (enable)/OFF (disable) are toggled each time you
press the button.
After making changes to the settings, be sure to press the [SAVE] button on the [MAIN] screen to save the settings to the
microscope's memory. If the microscope is turned off without saving settings, previous values are restored. For more
information on saving, see "1 Bulk Saving of Settings ([MAIN] Screen)" in this chapter.
Chapter 6
Settings
Setting Value
ON (default)
OFF
ON (default)
OFF
1-137
Description
Operation is enabled
Operation is disabled
Operation is enabled
Operation is disabled