Table of Contents
Advertisement
Operation with the [NOSEPIECE] Button
Display Status of the [NOSEPIECE] Button
[MICROSCOPE CONTROL] Screen
Ni-E
Displayed by default
Ni-U
Can be displayed by setting
Ci-E
-
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
(1)
Press the [NOSEPIECE] button.
(2)
Press the button for the objective to be used.
The objective is switched. The button for the currently
selected objective is highlighted (with a check mark on the
[MICROSCOPE CONTROL] screen, or with a yellow frame
on the [MIC EASY] screen).
Chapter 5
Individual Operations
[MIC EASY] Screen
Displayed by default
Displayed by default
Displayed (cannot be changed)
[MICROSCOPE CONTROL] Screen
[MIC EASY] Screen
1-38
Address of the nosepiece
currently in the optical path
Series (abbr.) of the objective
Magnification, immersion type
Advertisement
Table of Contents
Troubleshooting
