Nikon DS-L4 Instructions Manual page 75

Interlocking other motorized devices with the outputting of capture trigger signals (Ni-E only)
When using Ni-E, the following operations can be configured to be automatically performed when a capture trigger
signal is output by pressing the [CAPTURE] button on the microscope main body or the [CAPTURE
FRONT/LEFT/RIGHT/AUX] button on the DS-L4 screen.
 Optical path switching of the motorized quadrocular tilting tube

Switching of the filter cube in the motorized epi-fluorescence cube turret
For further details and the configuration method, refer to Chapter 6, "5.1.7 Configuring the Interlocked Operation
with Capture Command Sending or Trigger Signal Output". Press the [LINK] button at the top of the
[MICROSCOPE CONTROL] screen to jump directly to the configuration screen.
Chapter 5
Individual Operations
1-63