Viewing The Status Of Microscope On Ds-L4; Powering On/Off The Devices - Nikon DS-L4 Instructions Manual

Chapter
2

Viewing the Status of Microscope on DS-L4

This chapter describes the procedure to power on and off the DS-L4 and the configuration of screens that show the
information on the microscope.
1

Powering On/Off the Devices

Powering ON the devices and displaying the MIC EASY screen
1
Turn on the powers of the microscope main unit and motorized parts.
The motorized devices are initialized.
For details on turning on the power, refer to the instruction manual provided with your microscope.
2
Press the power switch of DS-L4 to turn on the unit.
The startup screen appears. The system configuration data and settings are acquired from the main unit, and
then the following screen appears. The completion of the initial operations takes about 40 seconds, depending on
the configuration of the microscope system. If you want to use an application software on the connected PC, start
the application software last.
3
Press [MENU], and press [MIC EASY] button on the menu tab.
The [MIC EASY] screen appears.
Shows or hides the INFO window.
Shutdown
1
Press [SETTINGS] on the LIVE or VIEW menu.
2
Press [SHUT DOWN].
Chapter 2
Viewing the Status of Microscope on DS-L4
[SETTINGS]
- MIC SETUP
- SHUTDOWN
Shows or hides the menu tab.
2-5