Operating The Motorized Hg Precentered Fiber Illuminator (Intensilight) - Nikon DS-L4 Instructions Manual

Operating the Motorized HG Precentered Fiber Illuminator (Intensilight)

1.12
To open/close the shutter built into the motorized HG precentered fiber illuminator (Intensilight), use the [SHUTTER
INTSL] button.
To switch the ND built into the motorized HG precentered fiber illuminator, use the [INTSL] button or the [Intensilight (ND
number)] buttons.
Prerequisite for motorized operation
A motorized HG precentered fiber illuminator must be attached to the microscope in order to perform the following
operation.
Opening/Closing the Motorized HG Precentered Fiber Illuminator's Built-in Shutter
1.12.1
Display Status of the [SHUTTER INTSL] Button
[MICROSCOPE CONTROL] Screen
Ni-E Displayed by default
Ni-U Displayed by default
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
(1) Press the [INTSL] or [SHUTTER] button.
(This operation is not required if the [SHUTTER INTSL]
button is already displayed. Go to the next step.)
(2) Press the [SHUTTER INTSL] button.
The shutter opens or closes each time the button is
pressed.
Chapter 5
Individual Operations
[MIC EASY] Screen
 Displayed on [INTSL] sub screen
and [SHUTTER] sub screen by
default
 Can be displayed individually by
setting
 Displayed on [INTSL] sub screen
and [SHUTTER] sub screen by
default
 Can be displayed individually by
setting
[MIC EASY] Screen
[MICROSCOPE CONTROL] Screen
When the shutter is open
When the shutter is closed
1-55