Information Screen For Eclipse Ma200 - Nikon DS-L4 Instructions Manual

3

Information Screen for ECLIPSE MA200

The displayed content will differ depending on the configuration and settings of your microscope.
The screen will only show devices that are connected to the microscope and recognized by DS-L4. For this reason,
the composition of the screen will differ depending on the configuration of the microscope. For information on
microscopes and devices that can be recognized by DS-L4, refer to Chapter 1, "Devices Whose Status Is Viewable
on DS-L4".
The information screen displays the status of the microscope.
MIC EASY Screen
Nosepiece type:
LV5 (Quintuple intelligent
nosepiece for LV series)
LV5-E (Quintuple motorized
nosepiece for LV series)
i6 (Sextuple intelligent nosepiece
for i series)
i7 (Septuple intelligent nosepiece
for i series)
NOT CONNECTED
(Not connected)
Magnification of the
magnification module
Objective series name
Objective name
Numerical aperture
Working distance
INFO Window
Nosepiece:
Address number, Objective name
Magnification of the
magnification module
Epi-illumination:
ON/OFF, lamp voltage
(If the light source is the HG
precentered fiber illuminator,
open/close state of the built-in
shutter, built-in ND dimming value)
Chapter 2
Viewing the Status of Microscope on DS-L4
Objective Details Screen
Closes the information screen.
Nosepiece:
Address icon, objective name
Displays the objective details screen.
Epi-illumination:
ON/OFF, lamp voltage
(If the light source is the HG
precentered fiber illuminator,
open/close state of the built-in
shutter, built-in ND dimming value)
Closes the objective details screen.
2-7
Switches the displayed content.
Closes the INFO window.