Operating The Motorized Xy Stage With The Position Specified On The Monitor; Enabling The Xy Movement With The Position Specified On The Monitor - Nikon DS-L4 Instructions Manual

Operating the Motorized XY Stage with the Position Specified on the
4
Monitor
Swipe (or drag with a mouse) the live image on the DS-L4 monitor to move the motorized XY stage.
To use the function, the function must be enabled on the [UTILITY] screen on the [MIC SETUP].

Enabling the XY Movement with the Position Specified on the Monitor

4.1
Prerequisite for configuration
To use this function, a motorized (or intelligent) nosepiece and a motorized XY stage must be attached to the
microscope.
Setting item
[ENABLE] ON
OFF (Default)
[Procedure]
[MIC SETUP]→[UTILITY]
Press the [ENABLE] button under [XY STAGE CONTROL] to
switch between ON and OFF.
After making changes to the settings, be sure to press the [SAVE] button on the [MAIN] screen to save the settings to
DS-L4's memory. If the microscope is turned off without saving settings, previous values are restored. For more
information on saving, see Chapter 6 "1 Bulk Saving of Settings ([MAIN] Screen)".
Chapter 5
Setting value
Swiping (or dragging with the mouse) on the screen moves the
motorized XY stage.
Does not allow the motorized XY stage to move according to the
position specification.
Individual Operations
Description
1-74