Nikon DS-L4 Instructions Manual page 14

Device
NI-FLT6-E Motorized Epi-fluorescence Cube
*3
Turret
NI-FLT6-I Intelligent Epi-fluorescence Cube
*3
Turret
NI-EXW-E Motorized Excitation Filter Wheel
NI-BAW-E Motorized Barrier Filter Wheel
C-HGFIE HG Precentered Fiber Illuminator
(motorized)
NI-ND-E Motorized ND Filter
NI-SH-E Motorized Shutter
NI-CUD-E Motorized Universal Condenser
Dry
NI-S-E Motorized XY Stage
*1: With the focusing stage system, the stage is elevated, and with the focusing nosepiece system, the objective is
elevated.
*2: DS-L4 cannot be used to move the elevating section to an arbitrary position.
*3: Motorized/intelligent epi-fluorescence cube turrets may be used in a single layer, or in two overlapping layers.
*4: Up to two motorized shutters can be operated.
*5: Refer to Chapter 6, "3.2 Configuring the Connection of Motorized Shutter" when changing the usage of the motorized
shutter to AUX (other than EPI/DIA).
Chapter 1
Motorized Units Operable from DS-L4
Operation Available on DS-L4
Switching of filter cube (including
the analyzer cube),
opening/closing the built-in
shutter
Address detection for turret in
optical path
Switching of excitation filter
Switching of barrier filter
Switching built-in ND,
opening/closing the built-in
shutter
Adjustment of ND filter
transmittance
*4
Opening/closing EPI/DIA/AUX
motorized shutter
Switching of module
Adjustment of DIA aperture
diaphragm
Stage movement control by
swiping
Movement to specimen
replacement position
Information about the attached filter
cube (see Chapter 6, "2.3
Configuring the Filter Cube
Information")
Information of attached filters (See
Chapter 6, "2.4 Configuring the
Excitation Filter/Barrier Filter
Information")
None
None
None
Information of attached condenser
modules (See Chapter 6, "2.2
Configuring the Condenser Module
Information")
Enable the function (See Chapter
5, "5.1 Enabling the XY Movement
with the Position Specified on the
Monitor")
None
1-2
Required Configuration
*5