Entering The Sleep State (Noise Reduction) - Nikon DS-L4 Instructions Manual

3

Entering the Sleep State (Noise Reduction)

To reduce the generation of noise by shutting off the supply of power to the motorized devices, use the [SLEEP] button.
For operations that are disabled in sleep state, refer to the Ni-E instruction manual "Operation".)
Display Status of the [SLEEP] Button
[MICROSCOPE CONTROL] Screen
Ni-E Can be displayed at the top of the
screen by setting
(The [SLEEP] button can be configured to be hidden or shown. If the [SLEEP] button is not displayed on the
[MICROSCOPE CONTROL] screen, refer to Chapter 6, "4.1.2 Showing/Hiding the [SLEEP] Button". To display the
[SLEEP] button on [MIC EASY] screen, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed" to position the
[SLEEP] button and refer to Chapter 6, "4.1.2 Showing/Hiding the [SLEEP] Button" to turn its display on.)
[Procedure]
Press the [SLEEP] button.
The motorized devices switch between the sleep state and
the normal state each time the button is pressed.
Chapter 5
Individual Operations
[MIC EASY] Screen
Can be displayed by setting
When in the normal state
When in the sleep state
1-73