Information Screen For Eclipse Lv100Da-U - Nikon DS-L4 Instructions Manual

4

Information Screen for ECLIPSE LV100DA-U

The displayed content will differ depending on the configuration and settings of your microscope.
The screen will only show devices that are connected to the microscope and recognized by DS-L4. For this reason,
the composition of the screen will differ depending on the configuration of the microscope. For information on
microscopes and devices that can be recognized by DS-L4, refer to Chapter 1, "Devices Whose Status Is Viewable
on DS-L4".
The information screen displays the status of the microscope.
MIC EASY Screen
Dia-illumination:
ON/OFF, lamp voltage
Current microscopy method:
INIT. (Initializing)
BF (Brightfield)
DF (Darkfield)
DIC (Differential interference)
FL (Fluorescence)
Objective series name
Objective name
Numerical aperture
Working distance
INFO Window
Nosepiece:
Address number, objective name
Epi-fluorescence cube turret:
Epi-fluorescence filter cube name
Epi-illumination:
ON/OFF, lamp voltage
(If the light source is the HG
precentered fiber illuminator,
open/close state of the built-in
shutter, built-in ND dimming value)
Chapter 2
Viewing the Status of Microscope on DS-L4
Objective Details Screen
Closes the information screen.
Nosepiece:
Address icon, objective name
Displays the objective details screen.
Epi-fluorescence cube turret:
Address icon, filter cube name
EPI aperture diaphragm diameter
Epi-illumination:
ON/OFF, lamp voltage
(If the light source is the HG
precentered fiber illuminator,
open/close state of the built-in
shutter, built-in ND dimming value)
Closes the objective details screen.
Switches the displayed content.
Closes the INFO window.
EPI aperture diaphragm diameter
Current microscopy method
(See the description on the above
screen for abbreviations.)
Dia-illumination:
ON/OFF, lamp voltage
2-8