7
Fully open the DIA field diaphragm and the DIA aperture diaphragm.
(1)
Press the [F. STOP] button on the DS-L4 screen to open the
sub screen. Move the slider to the right end.
(2)
Press the [A. STOP] button on the DS-L4 screen to open the
sub screen. Move the slider to the right end.
8
Set the condenser turret to the [OPEN] position (empty: bright-field).
Press the [CONDEN.] button on the DS-L4 screen to open the
sub screen. Select [OPEN].
9
Bring the 10x objective into the optical path.
Press the [NOSEPIECE] button on the DS-L4 screen to open the
sub screen. Select a 10x objective.
Chapter 4
Microscopy with DS-L4
1-29