Power Saver Mode; Setting The Power Saver Timer; Exiting Power Saver Mode - Xerox workcentre wc3655 User Manual

Features

Power Saver Mode

You can set the time the printer spends idle in ready mode before the printer transitions to a lower
power level.

Setting the Power Saver Timer

1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
Touch General.
2.
3. If needed, log in as administrator. For details, see the System Administrator Guide at
www.xerox.com/office/WC3655docs.
4. Touch Energy Saver.
5. Touch an option:
Intelligent Ready causes the printer to wake and sleep based on previous usage patterns.
−
− Job Activated sets the printer to wake when it receives a job.
Scheduled causes the printer to wake and sleep according to a schedule you specify.
−
6. If you selected Job Activated, to change the default low-power and sleep timeout periods, touch
Energy Saver Timers.
7. If you selected Scheduled, touch an option.
− Energy Saver Timers: This option changes the default low-power and sleep timeout periods.
Scheduled Settings: This option selects the times that you want the printer to wake or sleep for
−
each day of the week.
Touch Save.
8.

Exiting Power Saver Mode

The printer exits Power Saver mode automatically when it receives data from a connected device.
To exit Power Saver mode manually, on the control panel, press the Power Saver button.
24 Xerox® WorkCentre® 3655 Multifunction Printer
User Guide