Entering The Date And Time - Xerox Telecopier 7017 Technical Reference Manual

Entering the Date and Time

1. Select "32 Date and time"
a. Press the Menu key.
b. Press the 3 key on the keypad, then the
2 key.
The display will indicate:
32 DATE AND TIME
PRESS [ENTER] OR [SCROLL]
c. Press the Enter key
The display will indicate:
32 DATE AND TIME >12 HOUR
PRESS [SELECT]TO CHANGE THEN [ENTER]
2. Select the clock option
a. Press the Select key to select either the
12 hour or the 24 hour clock.
b. Press the Enter key to store your
selection.
The display will indicate:
32 ENTER DATE THEN TIME
01-01-88 02:36PM
3. Enter the date and time
Note: Observe the cursor beneath the first
digit of the data field. It will always indicate
the character block to be entered. If you make
an error while entering digits, press the Clear
key and enter the correct digits.
a. Enter two digits for the month. (For
example, enter 02 for February.)
The display will indicate:
32 ENTER DATE THEN TIME
02-01-88 02:36PM
Installation
b. Press the Enter key to store the entry.
c. Enter two digits for the day. (For
example, enter 26 for the day of the
month.)
d. Press the Enter key to store the entry.
e. Enter two digits for the year. (For
example, enter 88 for 1988.)
The display will indicate :
32 ENTER DATE THEN TIME
02-26-88 02:36PM
f. Press the Enter key to store the entry.
The display will indicate :
32 ENTER DATE THEN TIME
12 HOUR 02-26-88 02:36PM
where 12 hour indicates the clock option.
g. Enter two digits for the hour. (For
example, enter 10.)
h. Press the Enter key to store the entry.
i. Enter two digits for the minutes. (For
example, enter 45.)
The display will indicate:
32 ENTER DATE THEN TIME
12 HOUR 02-26-88 10:45PM
j. Press the Enter key to store the entry.
8/88
www.printcopy.info
6-10
If the 24 hour clock was selected, you have
completed this procedure. The display will
indicate the idle mode.
If the 12 hour clock was selected, the
display will indicate:
32 ENTER DATE THEN TIME >PM
PRESS [SELECT]TO CHANGE THEN [ENTER]
k. Press the select key to select either AM
or PM.
l. Press the Enter key to store your
selection.
The display will indicate an idle mode.
Telecopier 7017 / 7017SF