Stock Library Manager Default Settings - Xerox Versant 3100 Press User Manual

Troubleshooting
Problem
Trail Edge Deletions
Suggested Solutions
Change the Transfer Output Adjustment for Trail Edge setting.
• This feature is used to adjust the voltage ratio on the Secondary Bias Transfer Roll (BTR),
where the image is transferred from the belt to the paper.
• This feature can be found in Stock Library Manager > Stock Properties > Advanced Setup >
Transfer Output Adjustment for Trail Edge.
• Decrease the Transfer Output Adjustment for Trail Edge in increments of 5 to 10%. After
every increment adjustment run test prints and evaluate the output to determine if addi-
tional adjustment is necessary.

Stock Library Manager Default Settings

The information provides the default values, ranges, and recommended incremental
adjustments for the various Stock Library Manager features, options, and settings.
Alignment Profile
Option / Setting Default Value
Registration
0.0
Side 1, Side
Side 1, Lead 0.0
Side 2, Side 0.0
Side 2, Lead 0.0
Perpendicularity
Side 1 0.0
Side 2 0.0
Skew
7-22
Adjustment Step Available Range
Increments
0.1 -2.0 to 2.0 mm
0.1 -2.0 to 2.0 mm
0.1 -2.0 to 2.0 mm
0.1 -2.0 to 2.0 mm
0.1 -1.0 to 1.0 mm
0.1 -1.0 to 1.0 mm
Recommended
Incremental Ad-
justment
Determined by
test print output
Determined by
test print output
Determined by
test print output
Determined by
test print output
Determined by
test print output
Determined by
test print output
® ®
Xerox Versant 3100 Press
User Guide