Figure 2 Disconnecting Boss
Figure 3 Size Sensor Harness Assembly
Replacement
1.
Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125
REP 11.17 Size Sensor Housing Assembly
Parts List on
PL 9.1
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the printer from the 550 Sheet Feeder
2.
Remove the Tray from the Feeder.
3.
Remove the 550 Sheet Feeder Left Cover
4.
Remove the two screws that secure the 550 Sheet Feeder Size Harness Assembly into
the hole in the 550 Sheet Feeder and remove from the wiring harness
5.
Using a small screwdriver push the boss that secures the Size Sensor Housing from the
550 Sheet Feeder and remove
Figure 1 Size Sensor Housing Assembly
Replacement
1.
Reinstall the components in the reverse order.
02/2000
4-89
manuals4you.com
manuals4you.com
WARNING
(REP
11.1).
(REP
11.3).
(Figure
(Figure
1).
Repair-Adjustment
REP 11.16, REP 11.17
1).