Selecting Paper Options For Printing; Printing Multiple Pages To A Single Sheet (N-Up); Printing Booklets - Xerox Phaser 6700V/DX User Manual

Printing
Portrait
Portrait
2-Sided Print

Selecting Paper Options for Printing

There are two ways to select the paper for your print job. You can let the printer select which paper to use
based on the document size, paper type, and paper color you specify. You can also select a specific tray
loaded with the desired paper.

Printing Multiple Pages to a Single Sheet (N-Up)

When printing a multiple-page document, you can print more than one page on a single sheet of paper.
Print 1, 2, 4, 6, 9, or 16 pages per side by selecting Pages Per Sheet (N-Up) on the Layout/Watermark tab.

Printing Booklets

With 2-sided printing, you can print a document in the form of a small booklet. Create booklets from any
paper size that is supported for 2-sided printing. The driver automatically reduces each page image and
prints four page images per sheet of paper, two page images on each side. The pages are printed in the
correct order so that you can fold and staple the pages to create the booklet.
When you print booklets using the Windows PostScript or Macintosh driver, you can specify the gutter
and creep.
• Gutter specifies the horizontal distance in points between the page images. A point is 0.35 mm
(1/72 in.).
• Creep specifies how much the page images are shifted outward, in tenths of a point. Shifting
compensates for the thickness of the folded paper, which would cause the page images to shift
slightly outward when folded. You can select a value from zero to 1 point.
58 Phaser 6700 Color Printer
User Guide
Portrait
2-Sided Print, Flip on Short
Edge
Landscape
Landscape
2-Sided Print
Landscape
2-Sided Print, Flip on Short
Edge