Adjusting The Single Fold Position - Xerox 770 Digital Color Press System Administration Manual

System Settings > Common Service Settings
16. After you finish making adjustments, print another output sample with
Sample Printout and check the adjustment results.
17. Make adjustments accordingly by repeating the previous steps.
18. Select Save.
19. Select Close until the Adjust Fold Position screen appears.
20. Select the tray in which you loaded paper in step 1, and then press the Start button.
21. Select the adjusted fold position type, and select Save.
22. Continue to select Save or Close until you are returned to the main Tools tab display.
23. Exit administrator mode.

Adjusting the Single Fold position

NOTE
Adjust Fold Position can be access from three separate areas in Common Service
Settings (Tools/administrator mode):
• Tools > System Settings > Common Service Settings
> Paper Tray Settings > Custom Paper Settings
• Tools > System Settings
> Common Service Settings > Paper Tray Settings > Paper Tray Attributes
• Tools > System Settings > Common Service Settings > Maintenance
1. Load paper in the desired tray.
2. Login as administrator.
3. Access the Tools tab on the UI.
4. Select System Settings > Common Service Settings.
5. Select one of the following:
• Paper Tray Settings > Custom Paper Settings
• Paper Tray Settings > Paper Tray Attributes
• Maintenance > Finisher Adjustment
6. Select Adjust Fold Position.
7. Select Fold Position Type Setup, and select Change Settings.
8. Select Single Fold, and select Change Settings.
9. Specify Sheets to be folded, and select Sample Printout.
10. Select the tray in which you loaded paper, and press the Start button.
An output sample is printed.
11. Select Close.
12. Check the output sample printout, and measure the offset amount.
13. Select Long at Left or Long at Right.
14. Enter the measurement value you obtained previously in Values A Before Adjustment
field by touching the up/down arrow buttons.
15. Select Adjust.
16. Select Sample Printout again to print an output sample printout, and check the
adjustment results.
17. Make adjustments again if necessary.
2-48 ®
Xerox 770 Digital Color Press
System Administration Guide