Rep 9.21 Erase Bar - Xerox 8850 Service Manual

REP 9.21 Erase Bar

Parts List on PL 9.2
Switch off the Main Power Switch. Disconnect the Power Cord.
NOTE: In the following steps, the terms "Left" and "Right" describe machine locations as
observed from the Roll Media Supply Drawer side of the Printer.
Removal
1. Remove the Printer Drum Assembly. Perform
2. (Figure 1): Remove the Erase Bar, located on the right side of the Xerographic Module.
Figure 1 Removing the Erase Bar
Repairs and Adjustments
REP 9.21
WARNING
REP 9.2 Drum Assembly.
1
Remove the screw and slide the Erase
Bar out of the Printer
03/2003
4-102 8850/ 510DP