Crankshaft Group; Cylinder Block (Pulley End); V-Ribbed Belt - Summary Of Components - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
13 –

Crankshaft group

1

Cylinder block (pulley end)

⇒ "1.1 V-ribbed belt - Summary of components", page 34
⇒ "1.2 Removing and installing poly V-belt", page 37
⇒ "1.3 Removing and installing tensioning device for V-ribbed
belt", page 39
⇒ "1.4 Removing and installing ribbed belt pulley", page 40
⇒ "1.5 Removing and installing engine support", page 41
⇒ "1.6 Renewing crankshaft oil seal - belt pulley end",
page 44
1.1

V-ribbed belt - Summary of components

⇒ "1.1.1 Summary of components - Vehicles without air condi‐
tioning", page 34
⇒ "1.1.2 Summary of components - Vehicles with air condition‐
ing", page 36
1.1.1 Summary of components - Vehicles without air conditioning
1 - Bolt
❑ replace after removal
❑ to release and tighten
use counterholder -
T10475-
Caution
There is a risk of destruc‐
tion of the engine.
♦ So as not to adjust the
timing the crankshaft
must not be turned while
the screws are removed.
❑ 150 Nm + torque a fur‐
1
ther 180° ( / 2 turn)
2 - Crankshaft-belt pulley
❑ with vibration damper
❑ installing and removing
⇒ "1.4 Removing and in‐
stalling ribbed belt pul‐
ley", page 40
Caution
There is a risk of destruc‐
tion of the engine.
♦ So as not to adjust the
timing the crankshaft
must not be turned while
the vibration damper is
removed.
34
Rep. gr.13 - Crankshaft group