Skoda Octavia III 2013 Workshop Manual page 21

– Release screws -arrows- and remove holder.
Note
Collect leaking coolant by placing a cloth under it.
– Loosen hose clamp -1- and remove coolant hose.
WARNING
There is risk of injury from fuel.
♦ To relieve the fuel pressure, place a clean cloth around
the connection point and loosen the connection point care‐
fully before opening the fuel system.
Caution
Risk of contamination.
♦ Rules of cleanliness when working on the fuel supply sys‐
tem ⇒ "3.1 Rules of cleanliness", page 7
– First press the hose coupling -1- down, then press release
buttons -arrows-
⇒ "2 Separating push-on couplings", page 211
– Remove hose coupling with pressed release buttons.
– Press release buttons on the hose -2- to the activated charcoal
filter.
– Disconnect and expose hose.
– Pull off air guide hose -2-.
– Pull off -1- air filter housing upwards from the ball pin.
– Loosen hose clamps -3- and -4- and remove air guide pipes.
Note
For the following clip unclipping procedure use the removal tool
for inner door trim panel - MP8-602/1- .
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
.
.
1. Removing and installing engine
15