Skoda Octavia III 2013 Workshop Manual page 133

page 128
8 - Oil filter
❑ Moisten gasket with oil before installing
❑ In case of damage to the outer skin, the oil filter must be replaced
❑ 20 Nm
9 - Sealing ring
❑ replace after removal
10 - Oil level and oil temperature sender - G266-
❑ installing and removing
⇒ "1.4 Removing and installing oil level and oil temperature sender G266 ", page 134
11 - Bolt
❑ 8 Nm
12 - Bolt
❑ Tightening torque and tightening order
13 - Sealing ring
❑ replace after removal
14 - Oil drain plug
Note
♦ Replace the oil drain plug when
it has an integrated sealing ring.
Always replace the gasket ring.
♦
❑ 30 Nm
15 - Suction line
16 - Bolt
❑ 8 Nm
17 - Bolt
❑ for the tensioning device
❑ Tightening torques
18 - Sealing ring
❑ Renew ⇒ "1.6 Renewing crankshaft oil seal - belt pulley end", page 44
❑ for oil pump drive
19 - Screw
❑ replace after removal
❑ Tightening torques
20 - Oil pump
❑ installing and removing
21 - Gasket
❑ replace after removal
❑ Observe positioning of runners
⇒ page 128
⇒ "1.1 V-ribbed belt - Summary of components", page 34
⇒ page 133
⇒ "1.3 Removing and installing oil pump", page 131
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
.
127
1. Lubrication system