Skoda Octavia III 2013 Workshop Manual page 35

♦ Surface - T30119-
♦ Hook for MP9-200 and T30099 - MP9-200/10 (10-222A/10)-
♦ Adapter - MP9-200/18 (10-222A/18)-
♦ Support - 10-222A/31-3-
♦ Clutch - T40091/3-
Removing
– Remove the cooling water tank cover ⇒ Body Work; Rep. gr.
66 .
– Loosen hose clamps -1- and -2- and remove air guide pipe.
– Remove air filter housing
⇒ "2.2 Removing and installing air filter housing", page 239
– Remove battery tray ⇒ Electrical System; Rep. gr. 27 .
– Remove engine control unit
⇒ "8 Engine control unit", page 268
– Unscrew screws -arrows- and remove holder -1-.
Note
Holders are installed differently according to build version.
– Unscrew screw -1-, unclip upwards -arrows- and push slightly
to the side.
– Remove wiper arms ⇒ Electrical System; Rep. gr. 92 .
– Remove the cooling water tank cover ⇒ Body Work; Rep. gr.
50 .
– Remove caps of screwed connections for front suspension
strut domes.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
.
.
29
2. Assembly bracket