Skoda Octavia III 2013 Workshop Manual page 166

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Press release buttons on the hose -1- to pull off the activated
charcoal filter.
– Unscrew screws -arrows- and remove hose for crankcase
ventilation.
– Expose wiring loom -arrows-.
– Unscrew screws -1-, -3- and remove toothed belt guard -2- for
coolant pump toothed belt.
– Expose electric wiring loom -1- and coolant hose -2-.
– Loosen hose clamps -arrows- and remove coolant hoses.
– Loosen the screws in the sequence -5- to -1- and unscrew
them.
– Remove coolant pump with toothed belt.
– Remove thermostat housing when coolant pump is being re‐
placed
⇒ "2.7.1 Removing and installing thermostat for small coolant
circuit", page 164 .
Install
Note
Replace gaskets -arrows-.
♦
Remove toothed belt when coolant pump is being replaced.
♦
Secure hose connections with hose clamps which comply with
♦
the series design ⇒ Electronic Catalogue of Original Parts"ET‐
KA" .
160
Rep. gr.19 - Cooling