Crankshaft Group; Cylinder Block On Belt Pulley Side; V-Ribbed Belt - Summary Of Components - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
13 –

Crankshaft group

1

Cylinder block on belt pulley side

⇒ "1.1 V-ribbed belt - Summary of components", page 44
⇒ "1.2 Removing and installing V-ribbed belt", page 47
⇒ "1.3 Removing and installing tensioning device for V-ribbed
belt", page 49
⇒ "1.4 Removing and installing ribbed belt pulley", page 50
⇒ "1.5 Removing and installing engine support", page 51
⇒ "1.6 Replacing crankshaft seal on belt pulley side", page 53
1.1

V-ribbed belt - Summary of components

⇒ "1.1.1 Summary of components - Vehicles without air condi‐
tioning", page 44
⇒ "1.1.2 Summary of components - Vehicles with air condition‐
ing", page 46
1.1.1 Summary of components - Vehicles without air conditioning
1 - Screw
❑ replace
❑ to release and tighten
use counterholder -
T10475-
❑ 150 Nm + torque a fur‐
1
ther 180° ( / 2 turn)
Caution
There is a risk of destruc‐
tion of the engine.
♦ So as not to adjust the
timing the crankshaft
must not be turned while
the screws are removed.
2 - Crankshaft V-ribbed belt
pulley
❑ with vibration damper
❑ removing and installing
⇒ page 50
Caution
Risk of destruction of the
engine.
♦ So as not to adjust the
timing the crankshaft
must not be turned while
the ribbed belt pulley is
removed.
3 - V-ribbed belt
❑ check for wear
44
Rep. gr.13 - Crankshaft group