Skoda Octavia III 2013 Workshop Manual page 49

– Release screws -arrows- at holder for pre-exhaust pipe.
– Remove pendulum support
⇒ "2.1 Unit mounting - summary of components", page 26
– Remove wiper arms ⇒ Electrical System; Rep. gr. 92 .
– Remove the cooling water tank cover ⇒ Body Work; Rep. gr.
50 .
– Remove caps of screwed connections for front suspension
strut domes.
– Connect supporting device - T30099- as shown in the illustra‐
tion.
– Attach snap hook to the engine suspension eye, right.
– Slightly pre-tension engine/gearbox unit with the spindle, do
not raise.
– Remove engine mounts
⇒ "2.2 Removing and installing engine mount", page 28
– Remove bolts -arrows-.
– Unscrew screws -1-, -2-, -3-.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
.
.
1. Cylinder block (pulley end)
43