11 - Bottom radiator bearing
12 - O-ring
❑ replace after removal
13 - Coolant hose
❑ to remove, raise holding clamps
❑ connect
⇒ page 177
Note
The arrows which are on the coolant pipes and the coolant hose
ends must stand opposite to each other.
Connect coolant hose with quick coupling
– Remove old O-ring -2- in coolant hose -3-.
– Moisten new O-ring with coolant and insert into coolant hose.
– Press coolant hose onto connection -1- until there is an audible
click.
– Press coolant hose down again and check by pulling that the
plug-in connector is fully engaged.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
4. Radiator and radiator fan
177