Skoda Octavia III 2013 Workshop Manual page 291

– Separate electrical plug connection -1-.
– Unscrew screw -2- and pull out engine speed sender - G28- .
Install
Caution
Carefully insert engine speed sender - G28- into the bore.
This prevents the engine speed sensor - G28- from falling be‐
tween the engine and gearbox.
Installation is performed in a similar way in the reverse order. Pay
attention to the following points:
– Install the noise insulation ⇒ Body Work; Rep. gr. 66 .
Tightening torque
Component
Screw for coolant pump
Screw for engine speed sender
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
Nm
8 Nm
5 Nm
285
1. Ignition system