Fuel Delivery Unit With Sender For Fuel Gauge Display - Skoda Octavia III 2013 Workshop Manual

1.5 Fuel delivery unit with sender for fuel
gauge display
Special tools and workshop equipment required
♦ Removal wedge - 3409-
♦ Key - T30101 (3087)-
Removing
•
The fuel tank must not be more than
Note
If necessary, extract fuel from the fuel tank
♦
⇒ "1.2 Extract fuel from the fuel tank", page 189
Observe the safety instructions before starting fitting work
♦
⇒ "2.1 Safety precautions when working on fuel supply sys‐
tem", page 2 .
Observe rules for cleanliness
♦
⇒ "3.1 Rules of cleanliness", page 7
– Switch off ignition and all electrical loads, and pull out ignition
key.
– Removing rear seat bench ⇒ Body Work; Rep. gr. 72 .
– Unclip cover -1- for closing flange from holder catches
-arrows- using the removal wedge - 3409- .
– Disconnect plug connection -1- from fuel pump.
Vehicles with auxiliary heating
– Disconnect plug connection -2- from auxiliary heating dosing
pump.
Continued for all vehicles
WARNING
Risk of injury caused by fuel which is under high pressure.
To relieve the pressure in the fuel system, place a clean cloth
around the connection point and carefully loosen the connec‐
tion point.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
3
/ 4 full.
.
.
1. Fuel tank and fuel delivery unit
201