Checking The Charge-Air System For Leak Tightness - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Tighten screws -arrows- from centre to outside crosswise.
– Attach hose clamps -1-.
Note
When there is light pressure on the fins
⇒ "3.5 Assembly of radiators and capacitors", page 8
– Install fan shroud
⇒ "4.7 Removing and installing fan shroud for radiator fan",
page 182 .
– Check coolant level ⇒ page 151
Tightening torques
♦ ⇒ "2.1 Summary of components - charge air system",
page 228
♦ ⇒ Heating, Air conditioning; Rep. gr. 87 .
2.4 Checking the charge-air system for leak
tightness
Special tools and workshop equipment required
♦ Charge-air system testing device , e. g. -V.A.G 1687-
Work procedure
– Loosen hose clamps -1- and -2- and remove air guide pipes.
– Connect adapter - V.A.G 1687/15- with -V.A.G 1687/11- to the
exhaust gas turbocharger.
– Connect hose -1- of charge air system tester -V.A.G 1687- to
adapter.
232
Rep. gr.21 - Turbocharging/supercharging
.
.