Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
Test timing:
– Turn the crankshaft in direction of rotation of engine by 2 turns.
– Turn the fixing screw - T10340- up to the stop in the cylinder
block and tighten to 30 Nm.
– Turn the crankshaft further in direction of rotation of engine to
the stop.
•
The crankshaft cheek must now be resting on the fixing screw.
Note
The crankshaft is only locked in direction of rotation of engine
using the fixing screw - T10340- .
Note
The camshaft clamp -T10494- must move into position easily.
♦
The camshaft clamp must not be positioned using any kind of
♦
hammer.
If camshaft clamp - T10494- cannot be installed:
Caution
To prevent damage to the belt, do not use sharp-edged tools!
– Using the assembly tool - T10487- in -direction of arrow- press
on the toothed belt.
110
Rep. gr.15 - Cylinder head, valve gear