Skoda Octavia III 2013 Workshop Manual page 172

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Loosen hose clamp -4- and remove coolant hose -3-.
– Screw out screws -arrows- and remove cover -2- from ther‐
mostat housing -1-.
– Remove thermostat with spanner - T10508- .
– Light press the wrench - T10508- down, while doing so, turn
in the -direction of the arrow-.
Install
– Insert thermostat. Fit the centring pin in into the
guide-arrow-.
– Install thermostat with spanner - T10508- .
– Light press the wrench - T10508- down, while doing so, turn
in the -direction of the arrow- as far as it can go.
Installation is carried out in the reverse order. When installing,
observe the following:
Note
Replace gasket.
– Moisten gasket with coolant.
– Replenish coolant
⇒ "1.2 Draining and filling coolant", page 147
Tightening torques
Component
Thermostat cover screws on thermostat housing
166
Rep. gr.19 - Cooling
.
Nm
7 Nm