Skoda Octavia III 2013 Workshop Manual page 71

– Unscrew relief valve -1- with socket insert - T10545- .
– Remove oil spray nozzles -2-.
Installing
Installation is performed in a similar way in the reverse order. Pay
attention to the following points:
Caution
There is a risk of damage to the oil spray nozzles.
♦ Do not bend oil injection nozzles.
♦ Check oil injection nozzles after reinstalling the pistons.
♦ Replace the oil injection nozzles if they are bent.
1 - Pressure relief valve
2 - Oil spray jet
• Fitting position: Align guide edge of the oil spray nozzle -2- to
the cylinder block surface.
Tightening torques
Component
Pressure relief valve
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
Nm
27 Nm
65
4. Pistons and conrods