Skoda Octavia III 2013 Workshop Manual page 259

Install
– Clean hole in the cylinder head using a nylon cylinder brush -
T10133/4- .
Note
Replace combustion chamber sealing ring and O-ring.
♦
Replace distance ring if it is damaged.
♦
– When reinstalling an injector, clean combustion residues from
groove for the combustion chamber sealing ring and injector
shaft using a clean cloth clean.
– Fit assembly cone -T10133/5- with the new combustion cham‐
ber sealing ring -1- onto the injector -2-.
– Push combustion chamber sealing ring with assembly sleeve
-T10133/6- as far as possible onto the assembly cone -
T10133/5- .
– Turn assembly sleeve -T10133/6- , push combustion chamber
sealing ring into the sealing ring groove.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
253
4. Injectors