Removing And Installing Radiator Fan 2 V177 - Skoda Octavia III 2013 Workshop Manual

– Disconnect electrical plug connections.
– Release screws -arrows- and remove radiator fan - V7- .
Install
Installation is performed in a similar way in the reverse order. Pay
attention to the following points:
– Install fan shroud
⇒ "4.7 Removing and installing fan shroud for radiator fan",
page 182 .
Tightening torque
Component
Fan screw
4.9 Removing and installing radiator fan 2 -
V177-
WARNING
Risk of injury due to radiator fans starting up automatically.
♦ Before carrying out work in the fan shroud area, discon‐
nect the electrical plug connections.
Removing
Note
All cable straps should be fastened again in the same place when
installing.
– Removing fan shroud
⇒ "4.7 Removing and installing fan shroud for radiator fan",
page 182 .
– Disconnect plug connection -arrow-.
– Remove screws -2- and remove the radiator fan - V177- .
Installing
Installation is performed in a similar way in the reverse order. Pay
attention to the following points:
– Install fan shroud
⇒ "4.7 Removing and installing fan shroud for radiator fan",
page 182 .
Tightening torque
Component
Fan screw
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
Nm
5 Nm
Nm
5 Nm
4. Radiator and radiator fan
185