Removing And Installing The Fuel Distributor - Skoda Octavia III 2013 Workshop Manual

6 - O-ring
❑ replace after removal
❑ Moisten with engine oil
7 - Distance ring
❑ replace if damaged
8 - Injector
❑ installing and removing
9 - Combustion chamber sealing ring
❑ Do not grease or treat using any other lubricant
❑ Renew ⇒ "4.3 Removing and installing injectors", page 250
4.2 Removing and installing the fuel distrib‐
utor
Removing
WARNING
Risk of injury caused by fuel which is under high pressure.
♦ Before opening the high-pressure system, the fuel pres‐
sure must be reduced to residual pressure
⇒ "3.10 Reduce pressure in the high-pressure system",
page 10 .
Caution
Risk of malfunctions caused by soiling.
♦ ⇒ "2.1 Safety precautions when working on fuel supply
system", page 2
– Removing the intake manifold
⇒ "3.2 Removing and installing intake manifold", page 241
– Remove high pressure pipe
⇒ "6.3 Removing and installing high pressure pipe",
page 263 .
⇒ "4.3 Removing and installing injectors", page 250
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
.
.
249
4. Injectors