Removing And Installing Fan Shroud For Radiator Fan - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Press left and right radiator locking lugs simultaneously
-arrow- and remove coolant radiator from the charge air circuit
radiator.
Vehicles with radiator versions 2 and 3:
– Remove the cooler for the charge air circuit from the vehicle
together with the charge air circuit cooler.
Vehicles with radiator version 3
– Unlock catches for charge air circuit -1- -arrows A- from the
radiator fan for coolant -2-.
– Tilt the charge air circuit cooler -1- in direction of arrow -B- and
suspend in the direction of arrow -C-.
Installing
Installation is performed in a similar way in the reverse order. Pay
attention to the following points:
Note
When there is light pressure on the fins
♦
⇒ "3.5 Assembly of radiators and capacitors", page 8
♦ Replace O-rings.
– Install front bumper ⇒ Body Work; Rep. gr. 63 .
– Install fan shroud
⇒ "4.7 Removing and installing fan shroud for radiator fan",
page 182 .
– Connect coolant hoses with quick coupling
– Replenish coolant ⇒ page 148
Note
If the radiator has been replaced, all the coolant must be changed.
4.7 Removing and installing fan shroud for
radiator fan
Special tools and workshop equipment required
♦ Catch pan for workshop crane , e.g. -VAS 6208-
182
Rep. gr.19 - Cooling
.
⇒ page 174
.
.