Skoda Octavia III 2013 Workshop Manual page 110

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Using the assembly tool - T10487- in -direction of arrow- press
on the toothed belt.
– While doing so, insert camshaft control -T10494- to stop into
camshafts and tighten screw -arrow- hand-tight.
– Remove vibration damper
⇒ "1.4 Removing and installing ribbed belt pulley", page 40
– Release screws -arrows- and remove bottom toothed belt
guard.
Caution
There is a risk of damage to the camshaft.
♦ Do not use the camshaft fixer/locator - T10494- as a coun‐
terholder.
– Unscrew locking screw -1- on the camshaft sprocket fitting
position. Use counterholder - T10172- with adapters -
T10172/1- to do so.
104
Rep. gr.15 - Cylinder head, valve gear
.