– Separate electrical plug connection -2-.
Note
Place a cloth below to catch any leaking coolant.
– Pull off holding clamp -3- and take coolant temperature sender
on radiator outlet - G83- out of connection piece.
Install
Installation is carried out in the reverse order. When installing,
observe the following:
Note
Renew O-ring.
♦
Insert new coolant temperature sender - G83- into the con‐
♦
nection piece immediately in order to avoid loss of coolant.
– Remove front noise insulation ⇒ Body Work; Rep. gr. 66 .
– Check coolant level
⇒ page 151
1.2/63; 77 kW TSI engine - Edition 11.2014
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Coolant pump, regulation of cooling system
169