Skoda Octavia III 2013 Workshop Manual page 202

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
Removing
Note
Safety precautions when working on the fuel supply system
♦
⇒ "2.1 Safety precautions when working on fuel supply sys‐
tem", page 2 .
Rules of cleanliness when working on the fuel supply system
♦
⇒ "3.1 Rules of cleanliness", page 7
– Switch off ignition and all electrical loads, and pull out ignition
key.
– Removing rear seat bench ⇒ Body Work; Rep. gr. 72 .
– Unclip cover -1- for closing flange from holder catches
-arrows- using the removal wedge - 3409- .
– Disconnect plug connection -1- from fuel pump.
Vehicles with auxiliary heating
– Disconnect plug connection -2- from auxiliary heating dosing
pump.
Continued for all vehicles
– Push up pick-up coupling -2- -arrow A-. To do so, reach be‐
tween bottom plate and fuel tank with a finger.
– Simultaneously pull the fuel pump control unit - J538- -1- at
the electric wiring loom -3- carefully out of the uptake
-arrow B-.
– Take out fuel pump control unit - J538- inwards between fuel
tank and bottom plate.
– Open tank flap.
– Clean the area around the fuel filler neck.
196
Rep. gr.20 - Fuel supply system
.