Skoda Octavia III 2013 Workshop Manual page 262

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
– Remove injection valves
⇒ "4.3 Removing and installing injectors", page 250
– Insert injectors -1- into the feeder plate for injection units - VAS
6418/1- Pos. -2-.
– Immerse injectors with the feeder plate for injection units - VAS
6418/1- into the cleaning fluid - VAS 6418/2- .
– On the rotating head -4-, set a temperature of 50 °C.
– On the rotating head -5-, set a cleaning time of 30 minutes.
– Switch on ultrasound device using the button -3-.
Note
Once the cleaning temperature has reached 50 °C the set time
begins to elapse.
– Replace the combustion chamber sealing ring at each injector
after cleaning
⇒ "4.3 Removing and installing injectors", page 250
256
Rep. gr.24 - Mixture preparation - injection
.
.