Skoda Octavia III 2013 Workshop Manual page 187

– Raise holding clamp -arrow- and remove top left coolant hose
from radiator.
– Press the catches for the top radiator bearing -arrows- at the
same time, e..g with screwdrivers, and unclip the bearing on
both sides.
– Partially tilt cooler into the engine compartment.
Note
If the fuse latches break, you will not need to replace the top ra‐
diator bearing -1- . The fuse is replaced by a special screw -3- ⇒
Electronic Catalogue of Original Parts"ETKA" .
– Unlock the left and right catches from the cooler -1- arrow
-A- and raise the condenser.
– Press the radiator downwards until the radiator bearing de‐
flects at the bottom, to do so, unhook the condenser -2- from
the radiator -1-.
– Strap capacitor to the lock support.
Vehicles with radiator version 1
– Remove the cooler for the charge air circuit from the vehicle
together with the cooler for coolant.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
4. Radiator and radiator fan
181