Skoda Octavia III 2013 Workshop Manual page 193

1 - Screw cap
❑ screw in until there is an
audible click
❑ with securing suspen‐
ded to prevent any loss
at tank fuel filler flap
2 - Earth connection
❑ for fuel filler neck
❑ for discharging the elec‐
trostatic charge
⇒ page 188
3 - Bolt
❑ replace after removal
❑ 8 Nm
4 - Lock ring
❑ loosen and tighten up
with spanner -T30101
(3087)-
❑ 110 Nm
5 - Sealing ring
❑ replace after removal
❑ install when dry
6 - Fuel delivery unit
❑ with integrated fuel filter,
the fuel filter cannot be
replaced individually
❑ with sender for fuel
gauge display - G-
❑ Summary of compo‐
nents
⇒ "1.4 Summary of com‐
ponents - fuel delivery
unit and sender for fuel
gauge display", page 200
❑ installing and removing
❑ Checking electric fuel pump ⇒ Vehicle diagnostic tester
❑ Fitting position ⇒ page 189
❑ Connect fuel lines
❑ Removing and installing fuel gauge sender - G-
⇒ "1.6 Removing and installing the sender for fuel gauge display G ", page 204
7 - Fuel tank
❑ installing and removing
8 - Heat shield
❑ for fuel tank
9 - Circlip
10 - Tensioning strap
❑ Mark installation position before installation
❑ Ensure proper seating
11 - Bolt
❑ replace after removal
❑ 20 Nm + torque a further 90° (
⇒ "1.5 Fuel delivery unit with sender for fuel gauge display", page 201
⇒ page 189
⇒ "1.3 Removing and installing the fuel tank", page 195
1
/ 4 turn)
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
1. Fuel tank and fuel delivery unit
.
187