Skoda Octavia III 2013 Workshop Manual page 167

– Ensure proper seating of gaskets -arrows-.
– Moisten gasket for coolant pump with coolant.
Caution
Always adhere to the sequence of work steps given below
when installing the coolant pump.
This ensures that the toothed belt is correctly tensioned.
The following work steps must be carried out with the aid of a
2nd mechanic.
• Used toothed belts must always be replaced with new ones
when the coolant pump is being replaced.
– Place cylinder 1 to TDC
⇒ "2.3 Checking valve timing", page 81
– Fit toothed belt centrally, move coolant pump to installation
position.
– Mount coolant pump on cylinder head with securing bolts.
– Initially tighten screws in the specified order:
Stage Screws
1st -1 ... 5-
2nd -1 ... 5-
– Loosen all screws by 1 turn.
Tightening torque
by hand as far as the stop
10 Nm
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
2. Coolant pump, regulation of cooling system
161