Skoda Octavia III 2013 Workshop Manual page 112

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
• Fixing screw - T10340- turned up to the stop in the cylinder
block and tightened to 30 Nm.
• Crankshaft in engine direction of rotation applied to the fixing
screw - T10340- = "TDC" position.
– Replace screws -1-, -2- for camshaft sprocket and insert them
loosely.
• It must still be possible to turn the camshaft sprockets on the
camshafts, however they must not tilt.
• The sheet peg -arrow- of the tensioning pulley must engage
in the cast iron recess of the cylinder head.
– Fit crankshaft toothed belt pulley onto the crankshaft.
• The contact surface between the V-ribbed belt pulley and the
crankshaft toothed belt pulley must be free of oil and grease.
• Milled surface -arrow- on the crankshaft toothed belt must be
positioned on the crankshaft stub.
106
Rep. gr.15 - Cylinder head, valve gear