Skoda Octavia III 2013 Workshop Manual page 51

– Lift out sealing ring using the extractor hook -T20143/2-
-arrow-.
– Clean the contact and sealing surfaces.
Note
Do not oil new sealing ring.
– Push new sealing ring in -direction of the arrow- over the as‐
sembly sleeve - T10485/3- onto the assembly sleeve -
T10485/2- .
• Fitting position: Closed side of sealing ring points to the re‐
ceiver tube.
– Pull off assembly sleeve - T10485/3- in -direction of arrow-.
– Fit guide bushing -T10485/2- with seal -1- onto crankshaft
journal.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
1. Cylinder block (pulley end)
45