Replacing Crankshaft Seal-Belt Pulley Side - Skoda Octavia Workshop Manual

OCTAVIA
Edition 04.03
S00.5127.54.20
Crank Assembly
Replacing crankshaft seal -belt pul-
ley side-
Special tools, testers and aids required
♦ Torque wrench
♦ Seal extractor MP 1-226
♦ Thrust sleeve MP 1-231/1
♦ Guide sleeve MP 1-314
♦ Thrust sleeve T10053
♦ Guide sleeve
♦ Locking lever T30004 or counterholder MP
1-310
Removing
- Remove ribbed V-belt ⇒ page 13-5
K - Remove crankshaft toothed belt sprocket.
Lock toothed belt sprocket with locking le-
ver T30004 or counterholder MP 1-310
Note:
When bolting on counterholder, place 2 wash-
ers between toothed belt sprocket and counter-
holder.
K - Screw in the central bolt by hand in the crank-
shaft up to the stop.
- Turn out inner part of seal extractor MP
1-226 nine turns (about 17 mm) out of the
outer part and lock with knurled screw.
T10053/1
------------ 13-15 -------------
13