Reset Configuration Change Flag - ABB STT04 Instruction Manual

RESET CONFIGURATION CHANGE FLAG

This function resets the configuration change flag on HART devices.
When a device configuration parameter changes on a PTH or EBTH,
a change flag is set. When a change flag is set and a device status is
retrieved, the message: CONFIG CHANGED appears. When reset,
the status of the device is OK.
Key Display
FIX OUTPUT
CANCEL FIX OUT
S PE C IA L
FE ATU R E LCD SETUP
STANDARD CONFG
→ RST CFG CHANGED FLG
CHOOSE A TAG
E N TE R READY
OPERATING PROCEDURES
Comments
Use the arrow keys to select RST CFG CHANGED
FLG. Clears the configuration changed flag of the
HART device.
OPERATIONAL FUNCTIONS
4 - 15