Uploading And Downloading Configurations - ABB STT04 Instruction Manual

UPLOADING AND DOWNLOADING CONFIGURATIONS

STT04 terminal provides configuration storage flexibility. Configura-
tions can be created and stored on the STT04 terminal or stored
remotely on a personal computer. To remotely store configurations,
the DownLink software is required. DownLink software is shipped
with the STT04 (A1.1 or greater) terminal.
NOTE: If you do not have the DownLink software application, con-
tact the nearest ABB sales office for availability.
Use the following procedure to upload or download configurations:
1. Connect the female end of the RS-232-C (customer supplied)
cable to a vacant RS-232-C port (serial port) on the personal com-
puter.
2. Connect the male end of the RS-232-C cable to the STT04 termi-
nal.
3. If the personal computer is not on, turn it on and allow it to boot.
4. Turn off the STT04 terminal.
5. Put the STT04 terminal into the remote mode by pressing one of
the following key sequences based on the language of the STT04 ter-
minal (Table 4-2).
Table 4-2. Languages
Language
English
French
Spanish
German
The STT04 terminal screen displays the following:
NOTE: The first line that reads ABB STT04 is the default STT04
name. A unique STT04 name should be specified using the Down-
Link software application. In which case, the specified name would
appear in place of ABB STT04.
6. Click Start on the personal computer and open the ABB-STT04
program group.
UPLOADING AND DOWNLOADING CONFIGURATIONS
OPERATING PROCEDURES
STT04 Key Sequence
Hold down and and press
↑
1
Hold down and and press
↑
2
Hold down and and press
↑
3
Hold down and and press
4 ↑
ABB STT04
IN
REMOTE MODE
.
On
.
On
.
On
.
On
4 - 25