TBN480 CONDUCTIVITY TRANSMITTER
Key
CHANGE TEMP FOR CALI-
E N TE R
E N TE R
ID TAGNAME
E N TE R
Editing the Calibration Constants
Key
OUTPUT WILL BE
AFFECTED! PROCEED?
C A LI-
B R ATE
→ YES
CALIBRATION
J - 8
Display
BRATION
nn.nn °C
WORKING
CALIBRATION
COMPLETE
READY
These functions are for recording or modifying slope or offset calibra-
tion constants.
EDIT CONDUCTIVITY
This procedure steps through the modification of the conductivity.
Display
NO
Comments
Use the numeric keys to enter the process
temperature.
Comments
This operation will cause a change in output not cor-
responding to the input. Be sure the control loop is in
manual.
Select YES.