Fitting The Configuration/Reading Interface And Connecting The Nfc Wall-Mount Coupler - ABB AquaMaster4 Operating Instruction

A Q U A M A S T E R 4 | E L E C T R O M A G N E T I C F LO W M E T E R T R A N S M I T T E R | O I/ F E T4 0 0 - E N R E V. D
34
...5 Installation
Fitting the configuration/reading interface and connecting
the NFC wall-mount coupler
Referring to Figure 53 on page 32,
1 Stretch retaining strap
A
transmitter face C .
Referring to Figure 56 and Figure 57:
2 Clip the configuration/reading interface
the transmitter B , ensuring correct orientation.
3 Route connection cable
wall-mount coupler
.
Figure 56 Fitting the configuration/reading interface
(FET41X/43X)
(included with cover B ) over
over the front of
A
C to the required location for the
C
Figure 57 Fitting the configuration/reading interface (FET45XX
B
A